Chain and Plate Curls For DESTROYING Your Biceps!
By Nick Nilsson

Review Muscle Explosion From Nick Nilson

So who doesn't want bigger, stronger biceps?

Not too many trainers I know!

I've got an exercise that is going to just TRASH your biceps (in a good way, of course!)...

you just need to put together a few simple pieces of equipment, found in most gyms, to do it.

Even though the basic execution of this exercise looks pretty much exactly like a dumbell curl, this is NOT your typical dumbell curl - you're going to MAKE yourself a whole new piece of equipment with which to train those biceps! And this new piece of equipment is going to put MUCH more tension on your biceps from START to FINISH than standard dumbell curls.

All you need for this exercise is a short length of chain (about 1 to 2 feet long), a clip and a single cable handle.

How To Set Up And Perform The Exercise:
------------------------------------------------------------------------------------

First, get yourself a weight plate - if you can curl more than 30 lb dumbells, use a 25 lb plate. If not, use a 10 lb plate to start. You can always add more weight to the setup later - the first step is just to know how to set up and perform the exercise.

First, run the chain through the center hold in the weight plate with a clip attached to one end. Once you've run the chain through, open up the clip and connect the other end of the chain on to make a complete loop.

Now attach the single handle onto the clip.

You've now got a weight plate hanging from a single cable handle! THAT is your new piece of training equipment.

Grasp the cable handle and stand up. Hold the cable handle with your palm facing forward. Curl the handle up to the top position, just like you were doing a dumbell or cable curl.

When you come to the top, you'll find out why this setup is so effective...instead of losing tension at the top, as can happen at the top of a dumbell or barbell curl, because the resistance is hanging from the chain, you KEEP strong tension on the biceps at the top!

This makes for a VERY tough exercise with great tension on the biceps through the whole range of motion.

And to make this exercise even MORE effective, when you're coming up to the top of the curl, let your wrist bend back and down. This will move the resistance a bit further away from your arm and increase the tension on the biceps.

On the way down, keep your palm facing forward. This will keep better tension on the biceps on the way down.

On a side note, the weight plate should be perpendicular to your body as you do the exercise (i.e. if someone was standing in front of you, they could see the entire front face of the weight plate).

If you have a second short length of chain, you can also make a second chain-and-plate combo and do this exercise both arms at the same time (or alternating), just like dumbell curls.

CONCLUSION:
------------------------------

If you're not getting the results you want with standard barbell or dumbell curls, give this "chain and plate" curl a try. The change in tension will make a BIG difference in your results!

To see this exercise in action (pictures and video) and to see exactly how the set up is done, click the following link:

http://www.fitstep.com/Misc/Newsletter-archives/issue56-chain-plate.htm

----------------------------------
About the Author:

Nick Nilsson is Vice-President of the online personal training company BetterU, Inc. He has a degree in Physical Education and Psychology and has been inventing new training techniques for more than 17 years. Nick is the author of a number of bodybuilding eBooks including "Muscle Explosion! 28 Days To Maximum Mass", and several others all available at ( http://www.fitness-ebooks.com ).

Back To Nick's Articles

Back To Main Articles Page

Chain and Plate Curls For DESTROYING Your Biceps! By Nick Nilsson

Chain and Plate Curls For DESTROYING Your Biceps!
By Nick Nilsson